1 Click here to save your changes and exit ColorDesk Setup.
2 Click here to exit ColorDesk Setup without saving your changes.
10 TWAIN_32.DLL
16 Sorry, could not find the TWAIN Source Manager (TWAIN_32.DLL). Please copy the TWAIN Source Manager from your Program Disk to your Windows directory.
17 Sorry, no TWAIN Source found in the TWAIN directory. Refer to your TWAIN Source installation instructions.
18 Sorry, there is not enough memory to Acquire.
19 Sorry the TWAIN Source %s is already in use.
20 Bummer, there is a TWAIN error!
21 Sorry, capability error has occurred.
22 Sorry, protocol error has occurred.
23 Sorry, bad value.
25 Sorry, DG DAT MSG is out of expected sequence.
26 Sorry, detailed error status returns success.
27 Sorry, could not get detailed Error Code.
28 Sorry, Unknown error code returned by DG_CONTROL, DAT_STATUS, MSG_GET.
101 About ColorDesk Setup
102 All of the TWAIN devices installed on your computer are listed below. Click on them one at a time and select the matching profile from the dropdown. When you are done, select your default scanner and digital camera using the dropdowns at the bottom of the window.
103 Color Matching Setup
104 TWAIN Devices:
105 Profile:
106 Default scanner:
107 Default digital camera:
110 Select your monitor type from the dropdown list. If your monitor is not on the list, select Generic.
111 Color Matching Setup
112 Monitor Types:
120 All of the printers installed on your computer are listed below. Click on them one at a time and select the matching profile from the dropdown. When you are done, select your default printer using the dropdown at the bottom of the window.
121 Color Matching Setup
122 Printers:
123 Profile:
124 Default Printer:
130 Press
131 Next
132 to continue.
140 Press Save to save all the changes you have made and exit ColorDesk Setup. To cancel your changes, press the Exit button.
141 Color Matching Setup
142 Save and Exit
143 Cancel Changes and Exit
200 Input
201 Display
202 Printer
203 Finish
204 PictureMall
205 PictureMall
250 None
251 Generic
252 None
500 No TWAIN devices were detected on your computer. If you have a scanner or digital camera, install the TWAIN driver that came with it and then run ColorDesk Setup again. If the driver is already installed, try rebooting your computer and running ColorDesk Setup again.
501 ColorDesk Setup could not find any printer drivers on your computer.
502 Internal Error: ColorDesk Setup could not start the Color Matching Processor. Try reinstalling the ColorDesk Utilities.
503 ColorDesk Setup couldn't access the Windows System Registry Database. Reboot your computer and try ColorDesk Setup again.
504 An error occured while saving some of your changes.\nClose any other programs you are running and try saving again.\nIf this does not solve the problem you will need to Cancel your changes, reboot your computer, and try again.
505 Do you want to save your changes?
506 ColorDesk Setup
507 The driver you are using with your Epson scanner only support 16-bit programs.\nYou should upgrade to the Windows 95 version from Epson directly, or from the store where you purchased your scanner.
508 Old Driver Warning
1000 Click here to move back a step.
1001 Click here to move to the next step.
1004 Lists all the TWAIN devices installed on your computer.
1005 Click here to select the profile that matches your scanner or digital camera.
1006 Click here to select your default scanner.
1007 Click here to select your default digital camera.
1010 Lists all the printers installed on your computer.
1011 Click here to select the profile that matches your color printer.
1012 Click here to select your default color printer.
1020 Click here to select your monitor type.
1200 Click here to configure your scanner and digital camera.
1202 Click here to configure your monitor.
1204 Click here to configure your printer.
1206 Click here when you have finished configuring ColorDesk Setup.
1208 ColorDesk Setup 2.02
1209 Copyright ⌐ 1996-1997 ColorDesk, Inc.
1210 All Rights Reserved.
1220 Some of the options in ColorDesk Setup have not been set yet. For the best results when printing on your computer, you should go through all the pages again and set the profile information for all your devices.
1221 Return
1222 Exit
1223 ColorDesk Setup Reminder
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
